TV

1.  Turn on your TV.

2.  On the remote control, press and hold SETUP until LED blinks twice.

3.  Press the “TV POWER” key.

4.  Aim the remote control at the device. Press and hold down the DIGIT 

     key for your TV brand:

     1. Insignia / Dynex 2. LG / Zenith 3. Mitsubishi 4. Panasonic 

     5. Philips / Magnavox 6. Samsung 7. Sharp 8. Sony 9. Toshiba 0. Vizio

5. Let go of the key when your TV turns off. Setup is complete.

6.  If the power LED blinks twice, the code was successful. If there is one long blink, the setup failed. 

 

NOTE : To locate a code for a TV brand that is not listed, press and hold SETUP until the LED blinks twice. Press and hold down the OK/SELECT key. Let go of the OK/SELECT key when the TV turns off. 

 

* DVR service functionality not compatible with this remote.

If you are seeing black bars on the top and bottom of the screen (like a widescreen view), you can fix it by changing the screen ratio settings by following the steps below:  

ENTONE Set-top Boxes:

  • Tune to a problem channel like 50, 51, or 54.
  • Hit “menu” button on remote
  • Go to “settings”
  • Password is 0 – hit “OK”
  • Scroll down to “hardware settings” – hit “OK”
  • In the entone menu scroll down to “aspect ratio”
  • Highlight the selection box and arrow down to “16:9 ZOOM” – hit “OK”
  • Scroll down to the next to last box that says “SUBMIT” and hit “OK”
  • Scroll down and exit out and picture should be good now.

ADB Set-top Boxes

  • Tune to a problem channel like 50, 51, or 54.
  • Hit “menu” button on remote
  • Go to “settings”
  • Password is 0 – hit “OK”
  • Scroll over to “hardware settings” – hit “OK”
  • When the ADB menu comes up, “TV configuration” should be highlighted. – hit “OK”
  • Set the “TV aspect ratio” selection box to “16:9”
  • Set the “conversion mode” to “Pan-scan”
  • Hit the RED button on remote to back out of the menu and the picture should be good now.

The Input/Aux button on your remote allows you to access multiple devices that may be connected to your TV, such as your set-top box, DVD player or gaming system. By pressing Input/Aux, you change to the device you want your TV to connect to, instead of changing to a particular channel to view your video output.
Your guide may be set to view a Favorites List. Continue to press the Guide button on your remote to switch the Favorites List to All. The Favorites List indicator is located to the left of the guide, next to the TV icon that is above your programming list. Other Favorites Lists include: Subscribed, HD and any favorites lists you create.
The option to block channels is located in the Preferences menu in your settings. To turn this option on, highlight the check box next to Channel Blocking and press OK. To edit the list of channels that are blocked, highlight the Edit button and press OK. Blocked channels will not appear in the Guide. You can also call 740-772-8777 to request for removal of PPV titles from your Horizon View TV Service.

For Entone set-top boxes:

  • Tune to a channel that is displaying in widescreen, example: 50, 51, or 54.
  • Hit “menu” button on remote
  • Go to “settings”
  • Password is 0 – hit “OK”
  • Scroll down to “hardware settings” – hit “OK”
  • In the Entone menu scroll down to “aspect ratio”
  • Highlight the selection box and arrow down to “16:9 ZOOM” – hit “OK”
  • Scroll down to the next to last box that says “SUBMIT” and hit “OK”
  • Scroll down and exit out and picture should be back to fullscreen

For ADB set-top boxes:

  • Tune to a channel that is displaying in widescreen, example: 50, 51, or 54.
  • Hit “menu” button on remote
  • Go to “settings”
  • Password is 0 – hit “OK”
  • Scroll down to “hardware settings” – hit “OK”
  • In the ADB menu, highlight "TV configuration" - hit "OK"
  • Set the "TV aspect ratio" selection box to "16:9"
  • Set the "conversion mode" to "Pan-scan"
  • Hit the RED button on remote to back out of the menu and the picture should be back to fullscreen
Once you are registered, you can watch any WatchTVEverywhere program as long as you are a subscriber to that network. For example, you must be an A&E subscriber to watch A&E’s WatchTVEverywhere programs.

1. Turn on your TV or your A/V device.

2. On the remote control, press a device mode key (i.e. “TV” “AUX”) and hold for 5 seconds. The device mode key will light up.

 

NOTE : Use the “AUX” mode key for a VCR, DVD player, cable box, satellite receiver or audio device.

 

3. Press the “POWER” key once.

4. Aim the remote control at the device. Press either the “CH UP” key or “CH DOWN” key to start device auto-scan:

a. Press the “CH UP” key to start searching from the lowest device code to the highest at approximate 5 second intervals; OR b. Press the “CH DOWN” key to start searching from the highest device code to the lowest at approximately 5 second intervals. The “TV” or “AUX ” mode key will be on and blink every 5 seconds while in the device scan mode.

5. If the device turns off, a working code has been found. Press “OK” once to lock in the code. The selected mode key will blink twice.

6. If all code sets for that device are exhausted in the search and the “OK” is not pressed, the selected device key will blink rapidly 7 times and the search mode will be terminated.

 

NOTE : During the auto-scan, you can press “UP” arrow or “DOWN” arrow to advance to the next device code immediately without waiting for 5 seconds. You can also use “UP” arrow or “DOWN” arrow to change the direction of the search. While in programming mode, if no key is pressed within 30 seconds, the device mode key backlight will blink rapidly 7 times and then stop - indicating an error.

 

Entone URC Remote

Horizon offers a printable channel line-up card here. Please click on your location below to download the latest lineup, including HD channels.

Ross County

Pickaway County

 

 

Horizon has compiled a printable guide for getting started with your DVR, download it by clicking the guide below.

 

DVR Guide

 

Horizon offers step-by-step instructions for each of the remotes associated with our video services.

Please select below the remote you wish to program:
 
Titan/VIP
           
           
     
 

 

Horizon offers a printable channel line-up card here. Please click on your location or package below to download the latest lineup.
 
Ross County
Ross County Economy Package
Pickaway County